BOD Incubator

B.O.D Incubator


  • Designed Specially biological Oxygen demand determination and other applications like general incubation, serum studies and enzyme assays tests.
  • Castor wheel mounted cabinet is double walled.
  • Inner chamber made of Aluminium / S.S. Outer chamber made of M.S. with powder coating. Full length inner glass / acrylic door permits inspection of specimens with out disturbing the temperature.
  • Temperature Controlled by Digital Temperature Controller cum indicator. Temperature range 5° to 50°C with an accuracy of 0.5°C.
  • This unit is fitted with door operated illumination lamp inside the chamber.
  • Equipped with hermetically sealed compressor.
  • Air Circulation Fan for maintaining temp. Uniformity through out the chamber.
  • Flush fitting insulated double walled door has magnetic gasket.
  • The chamber is provided with modular removable shelves made of S.S. for complete flexibility is use. Inner chamber is fitted with refrigeration evaporator, heater and Air Circulator for creating positive Air flow through out the inner chamber for temperature uniformity.
  • To work at 230V A.G. only.


Other Details:

Size Dimensions
3 Cu. Ft (90 Ltr) 45 x 45 x 50 Cm
6 Cu. Ft (170 Ltr) 50x 500 70 Cm
10 Cu. Ft (280 Ltr) 55 x 55 x 90 Cm
12 Cu. Ft (320 Ltr) 60 x 60 090 Cm

Additional Information:
  • Minimum Order Quantity: 1 Piece
  • Item Code: BTL-6

Bacteriological Incubator


  • Incubators are sturdy double walled units
  • Inner Chamber made of S.S. and outer made of Mild Steel with Powder coating.
  • Gap between the walls fitted with glass wool insulation to avoid heat loses
  • Heating elements are made of high grade chrome plated nichrome wire. Temperature is controlled by thermostat.
  • Temperature range 5°C above ambient to 60°C and Accuracy: ± 2°C
  • Air Ventilations is provided on the top of the unit to remove the hot gases I fumes
  • In Lab type oven heaters are placed in the bottom oldest the unit
  • All the control switches & pilot lamps are fitted on the front panel
  • Trays should be supplied with G.I. wire mesh


Standard Sizes Available:

Size in Inches (In Cms.) (H X W X D)
12" X 12" x 12" (30 x 30 x 30 Cm.)
14" X 14" x 14" (30 x 30 x 30 Cm.)
18" X 18" x 18" (45 x 45 x 45 Cm.)
18" X 18" x 24" (45 x 45 x 45 Cm.)
24" X 24" X 24" (60 x 60 x 60 Cm.)
18" X 24" X 36" (45 x 60 x 90 Cm.)
24" X 24" X 36" (60 x 60 x 90 Cm.)

Additional Information:
  • Minimum Order Quantity: 1 Piece
  • Item Code: BTL-7
Looking for BOD Incubator ?
© Sunshine Instruments
Desktop Site Back to top